Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

The performance of RAMS in representing the convective boundary layer structure in a very steep valley

Data from a comprehensive field study in the Riviera Valley of Southern Switzerland are used to investigate convective boundary layer structure in a steep valley and to evaluate wind and temperature fields, convective boundary layer height, and surface sensible heat fluxes as predicted by the mesoscale model RAMS. Current parameterizations of surface and boundary layer processes in RAMS, as well as in other mesoscale models, are based on scaling laws strictly valid only for flat topography and uniform land cover. Model evaluation is required to investigate whether this limits the applicability of RAMS in steep, inhomogeneous terrain. One clear-sky day with light synoptic winds is selected from the field study. Observed temperature structure across and along the valley is nearly homogeneous while wind structure is complex with a wind speed maximum on one side of the valley. Upvalley flows are not purely thermally driven and mechanical effects near the valley entrance also affect the wind structure. RAMS captured many of the observed boundary layer characteristics within the steep valley. The wind field, temperature structure, and convective boundary layer height in the valley are qualitatively simulated by RAMS, but the horizontal temperature structure across and along the valley is less homogeneous in the model than in the observations. The model reproduced the observed net radiation, except around sunset and sunrise when RAMS does not take into account the shadows cast by the surrounding topography. The observed sensible heat fluxes fall within the range of simulated values at grid points surrounding the measurement sites. Some of the scatter between observed and simulated turbulent sensible heat fluxes are due to sub-grid scale effects related to local topography.     

Structure of turbulent plumes from a momentumless source in a smooth bed

The spatial development of a passive scalar plume is studied within the inhomogeneous turbulence of a boundary layer flow in a recirculating laboratory flume with a smooth bed. The source of the scalar is located flush with the bed, and the low-momentum source design is intended to simulate a diffusive-type scalar release. A weakly diffusive fluorescent dye is used as the scalar. Planar laser-induced fluorescence (PLIF) techniques were used to record the structure of the plume at a spatial resolution of 150 μm. The measured structure of the mean concentration field is compared to an analytical solution for shear-free, homogeneous turbulence. The laboratory plume exhibits spatial development in the mean concentration field that deviates from the self-similar behavior predicted by the analytical solution; this deviation is due to the mean shear and inhomogeneity of the turbulence. In particular, the influence of the viscous sublayer on the plume development is seen to be significant. Nonetheless, the analytical solution replicates some of the features seen in the laboratory plume, and the solution suggests methods of reducing the laboratory data even for cases where the results deviate from the analysis. We also examine the spatial development of the root-mean-square (rms) fluctuating concentration field, and use scalar probability density functions to examine the relationship between the mean and fluctuating concentrations.     

屋顶绿化生态系统箱的研制

调查发现广州市屋顶自然生长的维管植物有49科109属128种,植物种类较多的科为菊科、禾本科、桑科、景天科、茜草科和鸭跖草科;屋顶自然生长的植物种类数量与环境受污染程度成反比,而与周围植物的多少成正比;屋顶自然生长的植物由于长期适应屋顶的极端环境,形成了的一些独特的生态生物学特征。基于上述结果配置相应的植物组合,设计适于屋顶绿化的生态系统箱、配制相应土壤并进行技术集成,观测其生长和隔热效应。同时进行空白对照、黑网荫蓬对照、生态隔热层对照、普通土壤种植区对比试验,发现生态隔热层和生态系统箱具有成本低、易维持、隔热好、景观美的效果。     

东北过伐林灌木层物种多样性与林分因子的典型相关分析

研究林分特征尤其是经营上可以控制的因子对生物多样性的影响，将有助于制定合理的经营措施来维持和保护生物多样性，本文作者以我国东北过伐林区3种典型天然林类型为对象，采用典型相关分析方法，研究影响灌木层物种多样性的主要因子。结果表明：影响灌木层物种多样性的主要因子包括土壤含水率，树种多样性和林分密度；灌木层多样性组的变异被林分组第一典型变量解释的比例为68.32%,仍有31.68%的变异不能得到解释。     

气象激光雷达的城市边界层探测

为了研究城市边界层结构变化特征,2005年7月利用气象激光雷达在南京城区做了城市边界层探测试验,就此次观测试验作了简要叙述并选取部分观测资料为示例,着重对气象激光雷达确定城市边界层高度垂直分布及逐时变化以及地面气象环境对边界层的日变化影响进行了初步分析.结果表明,主要由近地层对流混合形成的城市边界层高度具有典型的日变化特点,早晚比较低,日间有一个从低到高再到低的变化过程.提出了一种由边界层混合状态确定边界层高度的方法.分析结果表明,由气溶胶消光系数确定城市边界层高度比较准确.将MSL探测结果与同步的低空无线电探测仪的温度探测结果进行比较,结果表明,两者获得的实际廓线分布相当吻合,线性良好.就地表温度、辐射、湿度及云等气象要素对边界层垂直分布及时间变化的影响做了分析.结果表明,这些气象要素的分布对城市边界层高度的垂直分布及其逐时变化有明显影响.     

Progress in developing an ANN model for air pollution index forecast

An air pollution index (API) reporting system is introduced to selected cities of China for public communication on air quality data. Shanghai is the first city in China providing daily average API reports and forecasts. This paper describes the development of an artificial neural network (ANN) model for the API forecasting in Shanghai. It is a multiple layer perceptron (MLP) network, with meteorological forecasting data as the main input, to output the next day average API values. However, the initial version of the MLP model did not work well. To improve the model, a series of tests were conducted with respect to the training method and structure optimization. Based on the test results, the training algorithm was modified and a new model was built. The new model is now being used in Shanghai for API forecasting. Its performance is shown reasonably well in comparison with observation. The application of the old model was only weakly correlated with observation. In 1-year application, the correlation coefficients were 0.2314, 0.1022 and 0.1710 for TSP, SO₂ and NO_x, respectively. But for the new model, for over 8 months application, the correlation coefficients are raised to 0.6056, 0.6993 and 0.6300 for PM₁₀, SO₂, and NO₂. Further, the new algorithm does not rely on manpower intervention so that it is now being applied in several other Chinese cities with quite different meteorological conditions. The structure of the model and the application results are presented in this paper and also the problems to be further studied.     

A new approach for modelling potential effects in cation adsorption onto binary (hydr) oxides

The current approach for modelling ion adsorption onto binary (hydr)oxides using homogeneous surface complexation models involves the assumption of either an ideal mixture of the two surfaces (i.e. two surface sites on one surface) or a patchwise surface (i.e. two surfaces with one surface site on each surface). As the physical truth should be between these two limiting cases, a model which assumes a patchwise surface constituted of three patches is proposed. Two patches represent the distinct (hydr)oxides, and the third one a mixture of these distinct (hydr)oxides. Using the diffuse layer model, the three approaches are applied to literature data for Cd adsorption onto binary mixtures of alumina-coated silica at total constant Cd concentration and varying amounts of alumina coatings. For Cd adsorption onto these binary (hydr)oxide systems, the new approach explains the observed potential effects. The proposed model, which contains two additional adjustable parameters in terms of site concentrations or one adjustable parameter in terms of specific surface area, is more successful than the two limiting cases. The new model is then validated by predicting Ca and Zn behaviour on the same binary (hydr)oxide system.     

膜生物反应器生物降解与膜分离共作用特性研究

膜生物反应器实质是生物降解与膜分离相互影响,共同作用的过程,污泥浓度与通量之间存在一定的相关关系,膜分离对生和性能尤其是细菌活性有着重要的影响,而生物反应器内细菌胞外聚合物,溶解性有机物及微细胶体可能成为形成凝胶层导致通量下降的主要因素。     

基于精细化观测的沙尘通量分布特征

研究沙尘随高度的变化特征对揭示沙尘物质在近地层分布特征具有重要意义。为揭示0—80 m沙尘通量的垂直分布规律,在野外实测的基础上,选取2008年7月20日、8月7日、8月19日、8月29日4次沙尘天气,对贴地层（0—0.05 m）、中间层（0.05—2 m）、近地层（2—80 m）的沙尘通量进行对比分析。结果表明：贴地层（0—0.05 m）,沙尘通量随着高度的增高呈增加趋势,最大值为1604.29 g?mm^?2。中间层（0.05—2 m）,沙尘通量随高度分布的关系为幂函数关系,且随着高度的升高沙尘通量减小,决定系数R²值均在0.9以上。近地层（2—80 m）,沙尘通量随高度增加呈分段函数分布,32 m、48 m处为沙尘通量的拐点高度。由此看出,研究沙尘通量对阐明沙尘输送机制非常重要,不仅可加强对沙尘输送的定量研究,还可为沙尘输送的数值模拟提供重要参数。